ПОРІВНЯЛЬНА ХАРАКТЕРИСТИКА АЦЕТАЛОВИХ ТА ЕЛАСТИЧНИХ (НЕЙЛОНОВИХ) ЧАСТКОВИХ ЗНІМНИХ ПРОТЕЗІВ
DOI:
https://doi.org/10.35220/2523-420X/2025.4.19Ключові слова:
часткова адентія, ортопедичне лікування, знімні протези, ацеталові й еластичні (нейлонові) часткові знімні протезиАнотація
Часткові знімні протези залишаються найбільш використовуваними при ортопедичному лікуванні часткової адентії, особливо у випадках, коли застосування незнімних конструкцій є неможливим або економічно недоцільним. Сучасні тенденції ортопедичної стоматології спрямовані на пошук альтернатив традиційним акриловим і металевим конструкціям з метою покращення естетики, біосумісності та комфорту пацієнтів. Розвиток напрямку використання у стоматології термопластичних полімерів зумовив активне впровадження ацеталових і еластичних (нейлонових) часткових знімних протезів, які відрізняються фізико- механічними властивостями та клінічними показаннями. Термопластичні матеріали демонструють різну жорсткість, модуль пружності та стійкість до деформації, що безпосередньо впливає на стабільність і довговічність ортопедичних конструкцій. Використання неметалевих кламерів дозволяє суттєво покращити естетичні показники, особливо у фронтальній ділянці, та зменшити ризик алергічних реакцій, пов’язаних із металами. Водночас, літературні дані вказують на необхідність диференційованого підходу до вибору матеріалу з урахуванням клінічної ситуації та функціонального навантаження. Мета роботи. Аналіз сучасних підходів щодо вибору матеріалу протезу при ортопедичному лікуванні часткової адентії на основі опрацювання наукових публікацій. Матеріали та методи. Опрацьовано публікацій баз даних Scopus, PubMed, Google Scholar з використанням комбінації ключових слів: «ортопедичне лікування», «часткова адентія», «знімні протези», «термоплас- тичні полімери», «ацеталові й еластичні (нейлонові) часткові знімні протези», «фізико-механічні властивості ацеталових і еластичних (нейлонових) часткових знімних протезів», «показання до використання ацеталових і еластичних (нейлонових) часткових знімних протезів». Критеріями пошуку була наявність ключових слів у журнальних публікаціях, монографіях, стандартах до 2025 року включно.
Посилання
Zarb G. A., Hobkirk J., Eckert S., Jacob R. Prosthodontic treatment for edentulous patients (13th ed.). Mosby. 2013.
Donovan T. E., & Cho G. C. Esthetic considerations with removable partial dentures. Journal of the California Dental Association, 2003. № 31(7). рр. 551–557. https://doi.org/10.1080/19424396.2003.12224200
Takabayashi Y. Characteristics of denture thermoplastic resins for non-metal clasp dentures. Dental Materials Journal, 2010. № 29(4). рр. 353–361. https://doi. org/10.4012/dmj.2009-114
Lowe L. G. Flexible denture flanges for patients exhibiting undercut tuberosities and reduced width of the buccal vestibule: A clinical report. The Journal of Prosthetic Dentistry. 2004. № 92(2). рр. 128–131. https://
doi.org/10.1016/j.prosdent.2004.04.026
Kaplan P. Flexible removable partial dentures: Design and indications. Dentistry Today. 2008. № 27(12). рр. 118–123. https://www.dentistrytoday.com/sp-1734805387/
Fueki K., Ohkubo C., Yatabe M., Arakawa I., Arita M., Ino S., et al. Clinical application of removable partial dentures using thermoplastic resin–Part II: Material properties and clinical features of non-metal clasp dentures. Journal of Prosthodontic Research, 2014. № 58(2).
рр. 71–84. https://doi.org/10.1016/j.jpor.2013.10.003
Negrutiu M., Sinescu C., Romanu M., Pop D., & Lakatos S. Thermoplastic resins for flexible framework removable partial dentures. European Journal of Prosthodontics and Restorative Dentistry, 2005. № 13(3).
рр. 295–299.
McCabe J. F., & Walls A. W. G. Applied dental materials (9th ed.). Blackwell. 2008. 9. Anusavice K. J., Shen C., & Rawls H. R. Phillips’ science of dental materials (12th ed.). Elsevier. 2013.
International Organization for Standardization. Dentistry – Base polymers – Part 1: Denture base polymers (ISO 20795-1:2013). ISO. 2013.
Hamanaka I., Takahashi Y., Shimizu H. Mechanical properties of injection-molded thermoplastic denture base resins. Acta Odontologica Scandinavica. 2011. Vol. 69, No. 2. P. 75–79. DOI: https://doi.org/10.3109/00016357.2010.517557
Sasaki H., Hamanaka I., Takahashi Y., Kawaguchi T. Effect of reinforcement on the flexural properties of injection injectionmolded thermoplastic denture base resins. Journal of Prosthodontics. 2017. Vol. 26, No. 4. P. 302–308. DOI: https://doi.org/10.1111/jopr.12419
Beyli M. S., von Fraunhofer J. A. An analysis of causes of fracture of acrylic resin dentures. The Journal of Prosthetic Dentistry. 1981. Vol. 46, No. 3. P. 238–241. DOI: https://doi.org/10.1016/0022-3913(81)90206-7
Singh J. P., Dhiman R. K., Bedi R. P. S., Girish S. H. Flexible denture base material: A viable alternative to conventional acrylic denture base material. Contemporary Clinical Dentistry. 2011. Vol. 2, No. 4. P. 313–317. DOI:https://doi.org/10.4103/0976-237X.91795
Fueki K., Ohkubo C., Yatabe M., Arakawa I., Arita M., Ino S. et al. Clinical application of removable partial dentures using thermoplastic resin – Part I: definition and indication of non-metal clasp dentures. Journal of Prosthodontic Research. 2014. Vol. 58, No. 1. P. 3–10. DOI: https://doi.org/10.1016/j.jpor.2013.12.002
Wadachi J., Sato M., Igarashi Y. Evaluation of the rigidity of thermoplastic resin dentures. Dental Materials Journal. 2013. Vol. 32, No. 3. P. 508–511. DOI: https://doi.org/10.4012/dmj.2013-061
Shah V. R., Shah D. N., Chauhan C. J., Doshi P. J., Kumar A. Evaluation of flexural strength and color stability of different denture base materials including flexible material after using different denture cleansers. The Journal of Indian Prosthodontic Society. 2015. Vol. 15, No. 4. P. 367–373. DOI: https://doi.org/10.4103/0972-4052.164908
Polyzois G. L., Andreopoulos A. G., Lagouvardos P. E. Acrylic resin denture repair with adhesive resin and metal wires: effects on strength parameters. The Journal of Prosthetic Dentistry. 1996. Vol. 75, No. 4. P. 381–387.
Phoenix R. D., Mansueto M. A., Ackerman N. A., Jones R. E. Evaluation of mechanical and thermal properties of commonly used denture base resins. Journal of Prosthodontics. 2004. Vol. 13, No. 1. P. 17–27. DOI: https://doi.org/10.1111/j.1532-849X.2004.04002.x
Кривчук О.А. Клінічна оцінка ефективності застосування вдосконаленої методики виготовлення пластинкових базисів знімних протезів. Український стоматологічний альманах. 2019. № 3. С. 34–39. DOI:
https://doi.org/10.31718/2409-0255.3.2019.06
Кузь В.С., Тумакова О.Б., Кузь Г.М., Тесленко О.І., Єрис Л.Б. Виготовлення повних знімних пластинкових протезів з різних груп базисних матеріалів та їх порівняльна характеристика. Актуальні проблеми сучасної медицини: Вісник Української медичної стоматологічної академії. 2020. Т. 20, № 3. С. 55–59. DOI: https://doi.org/10.31718/2077-1096.20.3.55
Ceraulo S., Barbarisi A., Hu Z. H., Caccianiga G., Lauritano D., Carinci F. The use of the flexible thermoplastic nylon-based dental prostheses: a literature review.
Prosthesis. 2025. Vol. 7, No. 6. Art. 169. DOI: https://doi. org/10.3390/prosthesis7060169
##submission.downloads##
Опубліковано
Як цитувати
Номер
Розділ
Ліцензія

Ця робота ліцензується відповідно до Creative Commons Attribution 4.0 International License.


